Name: 작은 에어 공기 피스톤 실린더 스테인레스 강 아이르타크 종 MA16X75
Brand: BRANDO
SKU: 마
Rating: 4.9 (154 reviews)

작은 에어 공기 피스톤 실린더 스테인레스 강 아이르타크 종 MA16X75

제품 상세 정보:

원래 장소:	닝보, 중국
브랜드 이름:	BRANDO
인증:	CE, ISO
모델 번호:	마

결제 및 배송 조건:

최소 주문 수량:	1대 pc
가격:	Negotiation
포장 세부 사항:	안 상자, 판지, 깔판
배달 시간:	4-7 일 일
지불 조건:	L/C, T/T, PayPal, 서부 동맹, MoneyGram
공급 능력:	달 당 100000 PC

접촉

상세 제품 설명

제품 시리즈:	마 라운드 본체 공기 실린더 스테인레스 강	구멍 내경 (밀리미터):	16, 20, 25, 32, 40, 50, 63
표준 타격 (밀리미터):	10, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500	임시 유형:	두 배 행동의 단 하나 행동
운영 압력 범위:	이중 작동 : 0.15 1.0 MPa에 연기를 선발하세요 : 0.2 1.0 MPa에	증거 압력:	1.5 Mpa
하이 라이트:	공기 피스톤형원통 , 작은 공기 공기압실린더 , 아이르타크 MA16X75

Mini Air Pneumatic Cylinders Stainless Steel Airtac Type MA16X75

A pneumatic air cylinder uses compressed air for its operation it is a linear actuator. The compressed air will be converted into kinetic energy or it can also be described as the conversion of potential energy into kinetic energy. This kinetic energy is used in the loads to move it. So when the compressed air is converted into kinetic energy the air will expand so that it can reach the atmospheric pressure. The piston in the cylinder is forced by the expanded air in the desired direction. The piston is mostly a disc or cylinder, and the piston rod will transfer the generated force to the object that is to be moved.

Specifications of MA Series Pneumatic Cylinder:

Bore Size (mm)		16	20	25	32	40	50	63
Acting Type	MSA / MTA	Single Acting					-
	MA / MAD / MAJ	Double Acting					-
	MAR	-	Double Acting
	MAC / MACD / MACJ	Double Acting with cushion
Fluid		Air (to be filtered by 40μm filter element)
Operating Pressure Range	Double Acting	0.15 to 1.0 MPa (1.5 to 10.0 bar) (22 to 145 psi)
	Single Acting	0.2 to 1.0 MPa (2.0 to 10.0 bar) (28 to 145 psi)
Proof Pressure		1.5 MPa (15 bar) (215 psi)
Temprature (℃)		-20 to +70
Speed Range (mm/s)		Double Acting: 30 to 800, Single Acting: 50 to 800
Cushion Type		MAC / MACD / MACJ Series: Variable cushion; Other Series: Bumper
Port Size		M5x0.8	1/8''				1/4''

Stroke of MA Series Pneumatic Cylinder:

작은 에어 공기 피스톤 실린더 스테인레스 강 아이르타크 종 MA16X75 0

Symbol of MA Series Pneumatic Cylinder:

작은 에어 공기 피스톤 실린더 스테인레스 강 아이르타크 종 MA16X75 1

Ordering Code of MA Series Pneumatic Cylinder:

Criteria for selection: Cylinder thrust:

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

태그:

담당자: Brandon

전화 번호: +8613454729544