당신의 수요에 초점
당신에게 제일 해결책을 제안하십시오
영업 및 지원:
 |
| 원래 장소: | 닝보, 중국 |
| 브랜드 이름: | BRANDO |
| 인증: | CE, ISO |
| 모델 번호: | SDA |
| 최소 주문 수량: | 1대 pc |
|---|---|
| 가격: | negotiable |
| 포장 세부 사항: | 안 상자, 판지, 깔판 |
| 배달 시간: | 4-7 일 일 |
| 지불 조건: | L/C, T/T, PayPal, 서부 동맹, MoneyGram |
| 공급 능력: | 달 당 100000 PC |
| 제품 시리즈: | SDA 소형 실린더 | 구멍 내경 (밀리미터): | 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 |
|---|---|---|---|
| 표준 타격 (밀리미터): | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 75, 80, 90, 100, 110, 120, 130 | 임시 유형: | 두배로 작동하는 것, 한 개의 acting_ 푸시형, 한 개의 acting_pull 형태 |
| 운영 압력 범위: | 이중 작동 : 0.15 1.0 MPa에 연기를 선발하세요 : 0.2 1.0 MPa에 | 증거 압력: | 1.5 Mpa |
| 강조하다: | Airtac Pneumatic Compact Air Cylinder,Pneumatic Cylinder 32mm Bore 80mm Stroke,Airtac SDA32X80 |
||
Airtac Type SDA32X80 Pneumatic Compact Air Cylinder 32mm Bore 80mm Stroke
Pneumatic compact cylinders consist of pistons in enclosures that generate linear motion. Their compact size and low weight range allow for shorter strokes than standard cylinders which make them suitable for positioning, clamping and ejecting smaller components.
Single-acting pneumatic compact cylinders have one port through which compressed air enters to push the piston rod in one direction. Spring mechanisms then pull the rod back in the other direction, creating the linear movement. In double-acting pneumatic compact cylinders, the air is forced in and out through two different ports.
Specifications of SDA Series Pneumatic Cylinder:
| Bore Size (mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | ||
| Acting Type | Double Acting | |||||||||||
| Single Acting_ Push Type, Single Acting_Pull Type | - | |||||||||||
| Fluid | Air (to be filtered by 40μm filter element) | |||||||||||
| Operating Pressure Range | Double Acting | 0.15 to 1.0 MPa (1.5 to 10.0 bar) (22 to 145 psi) | ||||||||||
| Single Acting | 0.2 to 1.0 MPa (2.0 to 10.0 bar) (28 to 145 psi) | |||||||||||
| Proof Pressure | 1.5 MPa (15 bar) (215 psi) | |||||||||||
| Temprature (℃) | -20 to +70 | |||||||||||
| Speed Range (mm/s) | Double Acting: 30 to 500, Single Acting: 50 to 500 | |||||||||||
| Cushion Type | Bumper | |||||||||||
| Port Size | M5 x 0.8 | 1/8'' | 1/4'' | 3/8'' | ||||||||
Stroke of SDA Series Pneumatic Cylinder:
Symbol of SDA Series Pneumatic Cylinder:
Ordering Code of SDA Series Pneumatic Cylinder:
Criteria for selection: Cylinder thrust:
Installation & Usage:
1. When load changes in the wonk, the cylinder wih abundant output capacity shall be ed.
2. Relative cylinder wth high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessasy protection measure shall be taken in the evironment with higher humidity. much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cyinder shall be fitered to 40μm or below.
6. As both of the front cover and piston of the cylinder are short. typically too large stroke can not be ed.
7. Anti-freezing measure shall be adopted under low temperature environment prevent moisture freezing.
8. The cylinder shall avoid the inluence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
담당자: Brandon Bao
전화 번호: 86-13454729544
팩스: 86-574-83879820
EVR 3 NC 032F8107 1/4'' Danfoss 유형 냉동 솔레노이드 밸브 220VAC
1028/3 Castel Type 3/8'' 냉동 솔레노이드 밸브 HM2 220VAC 230VAC
EVRA 40 EN-JS1025 Danfoss 유형 암모니아 솔레노이드 밸브 042H1128 042H1132
ASCO 맥박 벨브 SCG353A043 SCG353A044를 위한 C113443 C113444 격막
