PU225A-12 1-1/4'' SHAKO Type 2/2 Way Solenoid Valve PU225A Series

PU225A-12 1-1/4'' SHAKO Type 2/2 Way Solenoid Valve PU225A Series

Shako type PU225A series solenoid valve features:

1. Port thread 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2" BSP/NPT or Flange (F) JIS10K, (F3) ANSI150Lb, (F4) PN16.
2. Sealing NBR, EPDM or Viton.
3. 0.5 to 10 bar differential, 15 bar maximum working.
4. PU225A 2/2 normally closed, PU225AN 2/2 normally open.
5. Pilot acting for low starting pressure
6. Large flow rate and high working pressure.
7. Quick response.
8. Stainless steel stem provides exceptional durability.
9. Most voltages available from 12v, 24volt, 48volt, 110volt, 230volt and 380 volt AC or DC, optional ATEX coil.
10. Suitable media NBR - air, water, neutral gases and mineral oils - Viton fuel oil, gasoline, hi-test gasoline and diesel fuels - EPDM hot water and liquid detergents.

Main Dimension of PU225A series Solenoid Valve:

Technical Data of PU225A series Solenoid Valve:

Ordering Code of PU225A series Solenoid Valve:

Brando Solenoid Valve Factory Production Video:

More Shako Type Solenoid Valves for you to choose:

PU220A Series	PU225A Series
SPU225A Series	PU225S Series

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!